Q: How is the inoculum produced and processed?
This is a newly produced inoculation block.
Now the factory is short of manpower,
so I also join the production.
The production of inoculum is a complex affair.
First of all: the masters prepare the raw materials,
put them into the intermediate frequency furnace for melting,
and pour the molten iron into the corresponding mold after melting.
Second: the masters push the mold to
when the mold is not completely cooled.
Then put on heat-resistant gloves and beat the mold in the heat.
Finally: the masters knock out the inoculated blocks in the mold
and put them into the corresponding buckets.
This is where the complete inoculum production process comes.
This is the just-knocked inoculum,
which will soon be sent to the secondary screening process.
Everyone sees that when I am beating the mold,
it feels very fun, but it is actually very hard.
Let's take a look, this mold is a very heavy steel mold.
There are hundreds of steel molds in hand every day.
When the molten iron is poured in, it will stick to the mold,
so the masters have to beat it hard.
In the workshop in summer, the temperature is very high,
and it is very hard for the workers to work in a high temperature environment.
The spheroidizing agent products produced by our
Nanjing Dyfeng have optimized raw materials,
quality assurance, and can also be customized according to
the standards required by customers.
Welcome to consult and place an order.
Follow me, the youngest girl in the factory, see you next time, bye~
This is a newly produced inoculation block.
Now the factory is short of manpower,
so I also join the production.
The production of inoculum is a complex affair.
First of all: the masters prepare the raw materials,
put them into the intermediate frequency furnace for melting,
and pour the molten iron into the corresponding mold after melting.
Second: the masters push the mold to
when the mold is not completely cooled.
Then put on heat-resistant gloves and beat the mold in the heat.
Finally: the masters knock out the inoculated blocks in the mold
and put them into the corresponding buckets.
This is where the complete inoculum production process comes.
This is the just-knocked inoculum,
which will soon be sent to the secondary screening process.
Everyone sees that when I am beating the mold,
it feels very fun, but it is actually very hard.
Let's take a look, this mold is a very heavy steel mold.
There are hundreds of steel molds in hand every day.
When the molten iron is poured in, it will stick to the mold,
so the masters have to beat it hard.
In the workshop in summer, the temperature is very high,
and it is very hard for the workers to work in a high temperature environment.
The spheroidizing agent products produced by our
Nanjing Dyfeng have optimized raw materials,
quality assurance, and can also be customized according to
the standards required by customers.
Welcome to consult and place an order.
Follow me, the youngest girl in the factory, see you next time, bye~
